Business License
Contact Us
Your inquiry content must be between 10 to 5000 characters
Please enter Your valid email address
What is the impact of standard injection Mold spare parts on mold production?
Mold production technology is becoming more and more standardized. At the same time, standard injection Mold spare parts are standardized. Among injection molding molds, the most widely standardized mold base is widely recognized by the market.
Our company's mold base is unified by Long Kee For the mold base, we also have our own standard injection Mold spare parts. The following points should be in line with the following opinions:
1. standard injection Mold spare parts, good machining performance, easy to cut, and still maintain accuracy after machining
2. The polishing performance is good. Most of the working surfaces of the formed parts need to be polished to achieve mirror polishing. Therefore, the hardness of the steel is required to be between HRC35-40. Too soft and too hard steel is not conducive to the work of the polisher
3. Good wear resistance and fatigue resistance. The injection molding cavity will be subjected to high pressure and high temperature for a long time. The high carbon alloy steel will be heat treated to obtain higher hardness, but the toughness should be poor to form surface cracks. Even if the selected steel has strong wear resistance, it should avoid long-term mold repairing and polishing to ensure the dimensional accuracy of the cavity and ensure the service life of the mold.
4. It has corrosion resistance, sometimes corrosive plastic particles, such as polyvinyl chloride and flame retardant plastics, are injected into the injection molding cavity
Yize Mould focuses on connector moulds, plastic moulds for small parts, plastic moulds for structural parts, precision plastic moulds for plastic parts products,and 125 employees, 180 sets of equipment and professional injection Mold spare Parts & Accessories,EDM accuracy and Tolerance 0.003mm
This article is reproduced to：https://www.yizemould.com/newsdetail-805.html
YzmoldpartsYze
Recently Posted
-
ABS 30% anti-static thermoplastics injection molding
May 4, 2023Case Study: Co-Molding 5 Products with One Set for ABS 30% anti-static thermoplastics injection moldingIntroduction:Our client required the production of five different ABS 30% anti-static thermoplastics injection molding, all to be co-molded using only one set of molds. The parts needed to meet specific surface quality requirements, with different areas designated as either A-Level or B-Level surfaces.A-Level Surface ReRead More -
Solenoid valve housings made of PBT 30% Engineering Plastics injection molding
May 4, 2023Case study of a problem that manufactures solenoid valve housings made of PBT 30% Engineering Plastics injection molding.The company found the following problems in the PBT 30% Engineering Plastics injection molding:1. The red circle has burrs, with a step difference of about 0.05;2. The appearance of the red circle is uneven and the knife lines are serious;3. The red circle has fiber marks and serious air trapping. ThisRead More -
Case study Amphenol with LCP E130i Thermoplastics Precision Molded V-0 Material
May 4, 2023Introduction: Amphenol is a leading manufacturer of high-quality electronic connectors and interconnects systems. When Amphenol approached us to produce molded parts for their products using LCP E130i Thermoplastics Precision Molded V-0 material, we knew we had a challenging task ahead of us. This material is known for its high strength and excellent flame retardant properties, but it also has specific requirementsRead More -
About SMT high precision connector injection
February 6, 2023With the development of technology, many objects are now becoming lighter, smaller, and smarter, because they are easy to carry and easy to use, and the connector industry is no exception. Under the current trend of smaller and smaller connectors, it also poses a huge challenge to the material of the connector. Under this trend, high-temperature nylon and LCP emerged as the times require, and they shine in the field of SRead More
Contact Us
Recommended Products
-
Teflon™ PFA 440HPB Teflon Plastic Injection Mold Mould for Fluid-handling Components FactoryUS$ 50 - 210MOQ: 1 Pair -
Teflon™ PFA 440HPB Teflon Plastic Injection Mold Mould for Chemical Processing Industry (CPI) Components FactoryUS$ 50 - 210MOQ: 1 Pair
-
Teflon™ PFA 440HPB Teflon Plastic Injection Mold Mould for Billion Range FactoryUS$ 50 - 210MOQ: 1 Pair
-
Teflon™ PFA 440HPB Teflon Plastic Injection Mold Mould Beaded Connector FactoryUS$ 50 - 210MOQ: 1 Pair
-
Teflon™ PFA 440HPB Teflon Plastic Injection Mold Mould 4-layer Sealed Structure FactoryUS$ 50 - 210MOQ: 1 Pair
-
Flare Fitting Teflon™ PFA 440HPB Teflon Plastic Injection Mold Mould Trong Thermal Stress Resistance Corresponding 260℃US$ 50 - 210MOQ: 1 Pair
-
Teflon™ PFA 440HPB Teflon Plastic Injection Mold Mould Produced in a 100,000-class Clean RoomUS$ 50 - 210MOQ: 1 Pair
-
Teflon™ PFA 440HPB Teflon Plastic Injection Mold Mould Japanese Daikin 211SH High-purity Raw MaterialsUS$ 50 - 210MOQ: 1 Pair
-
Teflon™ PFA 440HPB Teflon Plastic Injection Mold Mould Plating FactoryUS$ 50 - 210MOQ: 1 Pair
-
Sumitomo Fiber Optic Connector Mould Electrical Connectors for SaleUS$ 50 - 210MOQ: 1 Pair
-
Electric Wire Sumitomo Small Waterproof Connector Mould SupplierUS$ 50 - 210MOQ: 1 Pair
-
High-Frequency Sumitomo Industrial Connector Mould SupplierUS$ 50 - 210MOQ: 1 Pair
-
High-Frequency Sumitomo Mechanical Connector Mould SupplierUS$ 50 - 210MOQ: 1 Pair
-
Dummy Plugs Sumitomo Electric Industries Connector Mould SupplierUS$ 50 - 210MOQ: 1 Pair
-
Sumitomo Electric Pa66 Gf35 Connector Mould Device SupplierUS$ 50 - 210MOQ: 1 Pair
-
Sumitomo Technologies Pa66 Gf35 Connector Housing Mould SupplierUS$ 50 - 210MOQ: 1 Pair
-
Terminal Sumitomo Connector Mould Electrical Wiring and Controls for Cars With ISO 9001 CertificationUS$ 50 - 210MOQ: 1 Pair
-
Sumitomo Pcb Connector Mould Housings Terminals and Accessories With ISO 9001 CertificationUS$ 50 - 210MOQ: 1 Pair
-
Hybrid Sumitomo Connector Mould Automotive & Components With ISO 9001 CertificationUS$ 50 - 210MOQ: 1 Pair
-
Sumitomo Pa66 Gf35 Connector Mould for Vehicle With ISO 9001 CertificationUS$ 50 - 210MOQ: 1 Pair
